Equipment for cooking of mixing, cooking, evaporation, cooling of Varo HPT 500S-Basic
Country of manufacture:Germany
Equipment for cooking of mixing of evaporation of cooling of HPT500-BASIC
The simplest and budget model, the equipment for cooking of mixing of evaporation of cooling of HPT500-BASIC which we offer for example here can process up to 500 liters into change.
This installation - the fine choice for small and flexible production with mixing, cooking, evaporation and cooling. If ingredients liquid or powdery, them it is possible to load vacuum absorption through hose.
The equipment for cooking of mixing of evaporation of cooling of HPT500-BASIC is the most competitive at the price. Though it is equipped only with standard mixer of VARO, but not helicoid, its productivity is all the same much higher, than at traditional systems. At the same time the VARO technology of cooking/cooling provides the lowest prigar product on internal walls of the reservoir.
- Characteristics of the equipment for cooking of mixing of evaporation of cooling of the VARO HPT500S-BASIC model in sanitary execution:
- The horizontal reservoir (tank) with double casing for heating and cooling of product (steam and water) - max. t +125 °C.
- Volume of one loading: at most - 500 l, minimum - 1/3 from maximum.
- Specific weight of product is 1,0 - 1,3 g/cm3.
- It is equipped with mixer with scrapers that allows to delete product from internal walls and to avoid burning of product on them.
- 3.2 bar of excessive pressure and vacuum.
- Cleaning of capacity: the system includes 3 nozzles of VARO Premium CIP.
Diameter of the reservoir is 750 mm
Length is 1500 mm
The free volume of the tank apprx. 870 l
The standard volume of the processed product 500 loborudovaniye for cooling evaporation mixing cooking
Power of transfer and electric motor of 2.2 kW
Speed of mixer is 6 - 16 rpm.
Vacuum (settlement figure) - 1 bar
General surface of heating/cooling of 11 sq.m
Materials: The surfaces adjoining to product and casing - from AISI 316L EN 1.4404 stainless steel with argument to Ra 0,8. All the rest - from stainless steel of AISI 304L EN 1.4301
Isolation: 50 mm layer of mineral wool
Pressure:-1 bar / 3.2 bar (g), casing 4.5 bar (g)
Description of process of production:
Step 1: The raw materials are loaded manually via the hatch.
Step 2: About 1 minute later after filling with raw materials in casing steam moves.
Step 3: After completion of pasteurization in casing pump chilled water. During cooling it is possible to install the program to stop cooling, and then to add aroma.
Step 4: The cooling water circulates until the preset value of temperature is reached.
Step 5: The product by means of excessive pressure is pumped over in capacity.
Step 6: After completion of process of filling of tanks in the reservoir the new party moves, and process is resumed.
Production time for HPT500S-Basic (example)
|Klubnichn. ext. Milk 45 according to Brix||500 kg *|
|Loading of raw materials||8 min.|
|Heating from 20 °C to 95 °C||28 min.|
|Cooling from 95 °C to 45 °C||30 min.|
|Transition to the following step / filling of tanks||10 min.|
|General time||81 min.|
* the Maximum weight is up to 600 kg.
Standard exit of products in 8 hours at the invariable mode / product
|Klubnichn. ext. Milk 45 according to Brix on HPT 500|
|Party 1||81 min.||81 min.|
|Party 2||81 min.||162 min.|
|Party 3||81 min.||143 min.|
|Party 4||81 min.||324 min.|
|Party 5||81 min.||405 min.|
|CIP cleaning||95 min.||500 min.|
|Product yield in hour||312 kg|
Country of manufacture:Germany
Information is up-to-date: 31.03.2020
Unbelievable price on Equipment for cooking of mixing, cooking, evaporation, cooling of Varo HPT 500S-Basic in Chişinău (Moldova) company Electromasina (INOXSUCCES), SRL SC.